289™ Side Emblem

Package includes one 289™ side emblem - POWERED BY FORD. This emblem was originally used on the FIA and 289 Cobra. The emblems come with backing pins for proper installation.

Dimensions: 4 3/16" X 1 5/16"

427 Side Emblem

Package includes one 427 side emblem. The FORD lettering is raised, as is the red and blue stripe above and below COBRA. Originally used on the 427 S/C Cobra. The emblems comes with backing pins for proper installation.

Dimensions: 4 3/16" X 1 5/16"

AC Center Insert

AC Cobra center insert badge. Previously used with a baking plate for 6 bolt steering wheels, but can be used anywhere including on the side of your toolbox. Comes with strong adhesive backing.

 Diameter: 3" (75mm)

AC Script Emblem

This chrome emblem is used for both the nose and deck of your AC Cobra. Comes with backing pins for proper installation. Package includes one emblem.

Diameter: 3"

AC Vin Plate

Give your car an authentic look with this VIN plate for your AC Cobra. Pre-drilled in the corners for installation and ready to be stamped with your own chassis and engine numbers.



Dimensions: 3.5" X 1.75"

Air Vent Mesh

Aluminum air vent mesh adds some style and keeps the bugs out. Oval shaped and easy installation with silicone, rivets or screws. (Not included). Sold as a pair. Dimensions: 7" x 3" x 1/2"

Bullet Mirror MR 400

Chrome bullet classic Talbot style mirror. Comes with two bases and mounting hardware. Bases are 1-1/2" Center to center and 3-1/2" center to center. Diameter of mirror only is 3 3/8, total diameter is 3 15/16. Each. Available in flat or convex.

Bumper Grommets, Front

Front (oval) grommets used to cover body holes. Includes 4 grommets (4 needed to complete the front). ID 3/4 inch @ 45 Deg angle. Set.

Bumper Grommets, Rear

Bumper Grommets Rear round grommets used to cover body holes. Includes 4 grommets. ID 3/4 inch. Set.

Bumper Jack Pads, Black

Powder coated black bumper jack pads. Fitted in competition cars for quick lifting on pit stops. OEM type and very racy looking. Each car uses two in rear and two in front. Used in the 289 FIA Cobra and 427 Cobra SC. Set of four.

Bumper Jack Pads, Stainless Steel

Polished Stainless Steel bumper jack pads. Fitted in competition cars for quick lifting on pit stops. OEM type and very racy looking. Each car uses two in rear and two in front. Used in the 289 FIA Cobra and 427 Cobra SC. Set of four.
 OUT OF STOCK. ONLY AVAILABLE IN BLACK.

Bumper Over Rider Stainless Steel

Bumper Over riders
Stamped and polished stainless steel over riders. Threaded mounting plates in back. Comes as a set of 4.
If you need front or rear pairs they are available please contact.
Front over riders are tilted forward like original car.

Bumper Sleeves, Front

stainless steel sleeves. L 11" ID 5/8" OD 3/4". Set of 4.

Bumper, Front Nudge Bar

Nudge bar is made of chrome steel to OEM specs and has lateral ears. Fits originals or reproductions Street Shelby Cobra.

Bumper overriders are not included.

Bumper, Rear Nudge Bar

Chrome steel rear nudge bar made to OEM specs. Fits original & reproduction street Shelby 289 & 427 Cobra.



Bumper overriders are not included.

Cam Wedge - Large

Catch, Cam Wedge. Large Cam Lock. 3” by 1 5/8 wide at widest part. Sold Each
Back In Stock!

Cam Wedge - Small

Catch, Cam Wedge Small. Small Cam Lock. 1-3/4” by 1 3/4 at the widest section. Sold each. (Not as a pair)

Cobra - Shelby American Vin Plate

Give your car an authentic look with this VIN plate for your Shelby American Cobra. Used on 289's and 427's. Ready to be stamped with your own chassis and engine numbers.

Dimensions: 3 1/2" X 2 1/8"

Cobra Badge Emblem

This Cobra® emblem is made of acrylic and has a peel off back with strong adhesive to that will keep it locked in place. This emblem fits in the center cap (horn) on our 9 bolt steering wheels, the aluminum shifter knob and as inserts on certain spinners. Package includes one emblem.

Diameter: 1 3/8" (35mm)
BACK IN STOCK!

Cobra Center Insert

Cobra  center insert badge. Previously used with a baking plate for 6 bolt steering wheels, but can be used anywhere including on the side of your toolbox. Comes with strong adhesive backing.

Diameter: 3" (75mm)
FINALLY BACK IN STOCK!