Knock Off Hammer

Hammer made of lead alloy in order to protect your spinners. Dead blow and soft compound. 6 pounds. Each.

License Plate Bracket - Front

The Front License Plate Bracket uses the bumper mounts for rock solid mounting. Manufactured from stainless steel for supreme corrosion resistance.

License Plate Frame - Shelby Motors®

Chrome plated Shelby Motors® license plate frame. Blue background at the top and bottom with chrome lettering.

License Plate Light - L467

Lucas reproduction license plate light with chrome housing and double internal light, hexagon screw and gasket. Each.

Louvers, Aluminum Side Vents

Aluminum side vent louvers used on both the 289 and 427 Cobra's. "L" brackets for installation included with the louvers. Dimensions: 8" X 5" X 2" Comes as a pair.

Marker Light - L488

Lucas small foot print marker used in some of the early cars. Round with twin filament. Available in amber, clear or red. Dia 3”, H 1-1/4”. Sold Individually

Marker Light - L534

This small light was used in some of the race cars, GT-40's, Daytonas and Cobras to illuminate the meatballs while night running. Also used for License plate lights on Daytona coupe Clear. Dia 1-11/32" at the base and 11/16" height. SOLD INDIVIDUALLY.

Marker Light - L539

Front marker. Winged lens. Beautiful surrounding chrome bezel. Used on Cobra 289 and Cobra 427. Dia 3-1/4”, H 2”. Sold Individually. Available in clear, amber or red lens.

Marker Light - L542 - Tail Light

Lucas reproduction of the rectangular red tail lights. Used on 289 Cobra and 427 Cobra. L 5”, W 3”, H 1”. Each. Gasket is included. Shown as Pair, priced and sold Individually



Important: IF TWO ARE NEEDED PLEASE ORDER TWO.

Marker Light - L692

Lucas round front marker and tail lights lamp. Popular light with reproductions. Round lens. Available in amber, clear or red. Twin filament. Used on Shelby Cobra. Dia 3-1/4”, H 2”. Sold Individually

Master Switch

Master toggle security switch with flip cover. 50Amp. Available in Yellow only. Each.

Meatballs

Made of static cling vinyl. They are removable/reusable and excellent for track or show events. They do not come off in the rain or at high speed. A good alternative to permanent paint, sticky back or tape. Meatballs come in 15.5 Inch diameter and you must specify the number (up to two Digits) in the comment section at checkout. White background with black numbers. Set of four.

PLEASE INCLUDE IN THE COMMENTS WHAT NUMBER YOU WOULD LIKE ON YOUR MEATBALLS  1 OR 2 Digits.



ALL MEATBALLS ARE NOW CUSTOM MADE TO ORDER. PLEASE ALLOW 1-2 WEEKS FOR ALL MEATBALL ORDERS.

Oil Cooler Mesh

Aluminum mesh to cover your Oil Cooler inlet. These are made from the same material as the Brake Air Vents and looks great when used in conjunction with them. Material can be shaped and cut for any other project you may have. Dimensions: 20" X 8"

Prop Rod, Trunk

Safety catch type prop rod. It can be used for hood or trunk. Original color plating. According to the car needs to be riveted or bolted Used on Shelby Cobra. L- 18".
NOW BACK IN STOCK!

Raydot Mirror- Spun Aluminum MR 300

Spun aluminum with anodized finish. Dia. 3-1/2”. OEM on Shelby R model and SC Cobra. Available in flat only. Each.

Raydot Convex Mirror - Chrome - MR 300C

Raydot Convex Mirror - Chrome Finish - MR 300C Dia. 3-1/2”. OEM on Shelby R model and SC Cobra. Each.

Raydot Mirror Side Post

Raydot side post bracket attaches Raydot mirror to the windshield post resulting in better view. No interference with wind-wings. Used in some Comp cars. Aluminum. Interchangeable left or right side. Each.



Mirror not included

Roll Bar Bezel Kit - 2"

Roll bar bezel kit for 2" inch roll bars. Includes two flat round rubber rubber grommets, two round polished aluminum T-6 bezels, one oval grommet, one oval bezel and installation hardware. FFR requires BK2. Kit.
BACK IN STOCK

Roll Bar Cross Member

Roll bar cross member bar attaches the shoulder harness seat belts to the roll bar. Made for 2” roll bars only. Includes fastening bolts, sleeve and I-bolts. These are welded steel models not cast!!

Roll Bar, Chrome

Chrome 2 Inch Roll Bar. Original Design W/Rear Mounted Third Leg. Includes Rubber Body Grommets & Mounting Brackets. Each.

Please make sure you select Driver or Passenger side.
Currently on a long back order 1-2 months please call or email for info.