427 Side Emblem

Package includes one 427 side emblem. The FORD lettering is raised, as is the red and blue stripe above and below COBRA. Originally used on the 427 S/C Cobra. The emblems comes with backing pins for proper installation.

Dimensions: 4 3/16" X 1 5/16"

Alternator Bracket, FE Engine

Plate steel alternator brackets are CNC plasma cut to original FE Ford geometry, location and adjustment to ensures correct belt alignment for the Motorcraft or Autolite alternators. This set of brackets includes the parts shown.  Finished in satin black painted finish.

Big Block Alternator Mounting Kit

Concourse correct mounting kit hardware. Cadium plated with correct "F" marking. Complete set

Big Block Alternator Spacer

OEM Alternator spacer made from extruded aluminum and anodized the correct color.

Clutch Boot, Big Block

Dust boot for your Big Block clutch lever. FE Engines.

Cobra® Oval Air Cleaner Assembly

Natural Cast Aluminum with raised Cobra letters for a single quad carb. Includes quality air cleaner element and installation hardware. Also used on Shelby Mustangs.

Dimensions: 21 x 10-1/4 x 2-1/2. Each.

Copper Embossed Exhaust Gaskets, SCE Pro

Clean, flat surfaces are essential to a good seal. However, we all know that that's not always the case, and the best way to seal a warped or uneven exhaust is with SCE Pro Copper embossed exhaust gaskets. These copper exhaust gaskets feature an embossed O-ring around the exhaust port to increase sealing pressure for a tight, leak-proof seal, even on imperfect surfaces. Whether your ride is a motor home or hot rod, or is used for towing or racing, you'll appreciate the trouble-free seal of SCE Pro Copper embossed exhaust gasket.  Sold as a pair.

Dipstick, Ford FE

Flexible Engine Dipstick designed with billet aluminum handle to coordinate with Lokar's Flexible Transmission Dipstick. Slim design allows mounting inside headers. Designed for use with factory, Sanderson cast manifolds or block hugger headers. E-Z read flexible inner dipstick measuring cable for accurate measure of engine oil.

Distributor Clamp, Big Block

This is a reproduction of the original distributor clamp for the FE engines. Made from Billet aluminum plate, Holds down the distributor for FE engines. Sold as each.

Flanges, Exhaust

Made of steel for 2" Tubes. Width 5.00", Thickness 3/8", 4 bolt holes for 3/8 holes with 4-1/4 center to center. Set of two.

Oil Breather Adapter, Black

This connects the back of your FE intake manifold to the puke tank. Plate Steel CNC cut with a beaded 3/4" tube angled towards the Puke Tank, Tig welded, Painted Black. Includes gasket.

Oil Cooler External Adapter

New External type adapter for oil cooler in anodized billet aluminum. Includes Remote Oil Filter Adapter and Take Off Plate with four (4) AN-10 coupler fittings and two ports for Oil Temp and Pressure.
Use with Wix filter 51258
Application: This setup allows the relocation of the oil filter away from the engine block.

Oil Cooler, British Style

Original British Style Oil cooler. 235 matrix. Powder coated in silver. Uses AN-10 fittings. Bracket width is 13"x 2" and height is 4 1/4" . Insures your oil cooling capacity and improves your look. Used on SC Cobra 427. Each.

Oval Air Filter Element

High quality replacement oval air filter element that fits oval style air cleaner assembly. Ford, 1965 - 1973.

Dimensions: 20 3/4" X 9 3/4" X 1 3/4"

Overflow Tank, Stainless Steel

Overflow Tank, 2 in Diameter x 15 in Long, Stainless Steel, Each This is the standard coolant overflow tank used on our complete Mk4 Roadster and Type 65 Coupe kits. Made of stainless steel, the capacity is 0.82 qt, and the tank measure 2" in diameter by 15" long. Stainless steel tank captures coolant overflow and recirculates it to the radiator. Machined aluminum cap twists into the filler neck and seals with an O-ring. Inlet/outlet fittings accept 1/4 inch diameter hose. Unit includes mounting brackets and hardware. Measurements are of tank body; add 2 inch for overall length.

PCV Valve Breather Plate

CNC plasma cut steel plate fitted with rubber grommet and PCV Valve. This bolts on the back of the FE intake manifolds and allows crank case ventilation with the back fire protection of the PCV valve. This simply gets connected with a hose to your intake vacuum port.

Pilot Bearing, FE Engines

Remote Oil Filter Adapter Bracket

Remote oil filter adaptor bracket. Used on FE engines. Used on Cobra SC 427. Each.

Remote Oil Filter Adapter Plate

New External type adapter take off plate for oil cooler in anodized billet aluminum. Includes Take Off Plate with two (2) AN-10 coupler fittings.

Application: This take off plate will be attached at the engine in place of the oil filter. This allows the oil filter to be placed remotely away from the block.

Side Pipe Gaskets

Side Pipe Gaskets. Mounting holes are 4 1/4 center to center. Set of 2.